Bathroom Cleaning: Fight Mold, Mildew, And Hard Water Stains
Maintaining a clean and organised bathroom is crucial for reducing the risk of germs infestation, infection and illness. Regular cleaning of shower recess, curtains, walls, bathtubs, toilet, sink and faucets can keep mould and hard water stains at bay.
While regular cleaning certainly helps, sometimes you must do deep cleaning using the proper tools and products. This becomes more pivotal when preparing for the end of your lease. You can hire cheap bond cleaners in Darwin to help pass the final rental inspection and secure your bond money. Make sure you find the source of mould and mildew and kill it using a proper guide because both are fungi that can lead to various health hazards.
You can consider the following hacks to clean your bathroom by tackling mould, mildew and hard water stains. This guide includes all-natural cleaning products to help achieve a clean, shiny and hygienic indoor environment.
Let’s Get Started!
-
Identify the Source: Mould, Mildew and Hard Water
As you begin the process, inspect the entire bathroom and look for mould, mildew and other stubborn stains.
While mould is often black or green and loves growing in dark and humid areas, mildew is flat, usually grey or white. The root cause could be bad ventilation, water leakage problems, excessive moisture or high humidity levels. It can also grow on HVAC system of your home. So regularly clean your air vents to ensure quality indoor air.
Do the same for hard water stains and identity the affected areas. A high concentration of magnesium and calcium makes water hard, which builds up on the showers, faucets, sinks, bathtubs and floors. This can make your bathroom look dull and dirty.
Tip: Hire a professional handyman in Darwin to fix the water leakage or leaky taps to prevent mould re-growth.
-
Prioritise Safety Measures
Direct contact with black or grey spores can cause skin infections or lead to nasal congestion, cough, sneezing, etc. It can even worsen your asthma conditions.
So, it is always good to follow safety protocols, especially for allergy sufferers. All you need to do is to:
- Open doors and windows for proper cross ventilation.
- Wear a face mask.
- Wear rubber gloves when tackling mould
- Avoid using harsh or harmful cleaners, such as ammonia, bleach, etc.
-
Tackle Mould From Ceilings with Hydrogen Peroxide
Make sure you fix the leakage issue before removing mould and mildew from the bathroom ceiling.
If the prime source is moisture, add an exhaust fan or run a dehumidifier to reduce dampness.
Instead of using store-bought cleaners, you can prepare a homemade cleaning solution using one part 3 per cent hydrogen peroxide and warm water.
Pour this into a spray bottle and apply it over the affected area. Leave it for a few minutes to kill black spores. Now, scrub off the surface and wipe with a clean rag.
Tip: Test the product on a hidden area to see how it reacts.
-
Tea Tree Oil + Vinegar to Kill Mildew
Tea tree oil has natural antifungal properties, making it a perfect choice for eliminating mould infestation. You can mix a few drops of tea tree oil in white vinegar and a warm water solution.
Spray the solution on surfaces like shower doors, walls, curtains, glass doors, tile grouts, etc and leave it for 20-30 minutes or until you scrub it. White vinegar is also acidic, which can do wonders in removing stubborn stains.
Read on the tips to clean mould with vinegar and baking soda, which is an unusual combination when cleaning a home.
-
Fight Mould & Mildew With Borax
Borax is another natural product that can help you remove mould and mildew from surfaces like bathroom walls, shower curtains and other areas without causing any damage.
Mix one cup of borax with one gallon of warm water. Spray the solution onto the affected surface. You can also use hydrogen peroxide solution along with borax.
Use a soft-bristled brush or sponge to banish stubborn stains. If you want to tackle brown toilet bowl stains, calcium deposits and soap scum, hire professionals for a quality bond cleaning Darwin. They can transform the dirty bathroom into a sparkling space.
-
Prevent Mould Re-Growth
Make sure you dry the surface after cleaning. If you want to combat mould and mildew in the bathroom, run an exhaust fan for a few minutes after a shower to remove excess moisture. Also, wipe down shower walls and doors after using the bathroom.
Keep your floors dry and disinfect dirt-laden bathroom surfaces daily
-
Distilled White Vinegar for Hard Water Stains
The unpleasant white stains or limescale on faucets, showerheads, sinks, and tiles can ruin your bathroom’s overall look and feel.
Soak affected areas in distilled white vinegar solution for half an hour. In the next step, scrub the area with an old toothbrush, rinse and dry completely.
White vinegar can also help remove rust and other stubborn stains without causing any discolouration.
-
Apply Lemon Juice or Citric Acid on Calcium Deposits
Lemon or any other citric acid can help remove calcium and magnesium deposits without causing any damage. Spray it and allow the product to rest for 10 minutes. Scrub the area and rinse with plain water.
-
Use Magic Eraser For Sparkling Results
Magic erasers can do wonders in removing hard water stains from walls, floors and sinks. It is a melamine foam that can help achieve shiny outcomes with ease.
-
Baking Soda to Remove Soap Scum
Make sure you deep clean every nook and cranny of your bathroom before the final rental inspection. After tackling stubborn stains, you can remove soap scum, grime, dirt and other debris using baking soda. It is a natural cleaner, disinfectant and deodoriser that can also help you unclog drains.
With this single product, you can clean and disinfect your bathroom. Call the best bond cleaners in Darwin for intense cleaning Also, do necessary repairs on a rented property before the inspection and secure your bond money.
Consider the following hacks to clean your bathroom:
