How To Clean Carpets Before The End of Lease Inspection
Unfortunately, regular wear and tear, accidental pet stains and food spills can make them look dull, discoloured and dirty. Stained floor coverings ruin the entire look and feel of the house and harbour harmful germs and bacteria. Accumulated dust embedded deep inside the fibres can also pollute the indoor air– which is not good for the respiratory system.
A dirt-laden carpet can lead to a rental dispute because a landlord inspects everything before handing over the deposited security. Thus, you should clean carpets using the best products before the end of your lease inspection.
Here are some useful hacks to help you tackle dust specks, pet hair, pollen, allergens, spills, splatters, mould, stubborn stains and pungent odours from your floor coverings.
Let’s Get Started!
1. Remove Loose Dirt and Debris
A vacuum cleaner with a HEPA filter is one of the best tools to fetch dirt, dust, grime and other loose particles from your carpet. You can use a heavy-duty machine to get into every nook and cranny.
Here are a few tricks to keep in mind for better results:
Professionals thoroughly vacuum your carpets and rugs while performing a thorough bond cleaning Darwin.
2. Use a Rubber Squeegee for Pet Hair
If you still see specks of pet fur/hair around your carpet, try this hack and see great results. Run a squeegee over your delicate floor coverings in a streamlined manner. This tool will help you collect pet hair into clumps that are easy to vacuum up.
The sturdiness of rubber grips pet fur well and pulls them out from the fibres of your carpet without any hassle.
Follow more tips to remove pet hair around your house.
3. Spot Clean Carpet Stains
Tackling food spills and other stubborn carpet stains may seem like an overwhelming task. Most people cause damage to the carpet by rubbing the fabric hard using abrasive tools. Also, don’t use harsh cleaners that contain ammonia, bleach and other harmful chemicals.
Instead, blot the surface using eco-friendly cleaning products to remove different types of carpet stains, including:
4. Pet stains
They look ugly and smell worse. If you have a dog or cat, you must know this hack to tackle pet urine stains and lingering odour. Use a paper towel or a microfiber cloth and blot up to soak up the urine.
Then, mix one part of white vinegar and 2 parts of water in a spray bottle. Spray on the affected area and blot the surface again using a clean towel. Make sure you use natural cleaners to get rid of cat urine smell out of your carpet.
5. Red Wine Stains
Make sure you inspect the carpet thoroughly and remove wine stains before the rental inspection. It is good to act on such spills as quickly as possible. To remove the wine spill, sprinkle a generous amount of salt or baking soda. Leave it for a few minutes to absorb the stain before you vacuum it.
6. Blood Stains
These nasty stains on delicate floor coverings can hold back a part of your bond money. To impress your fussy landlord, remove blood stains from your carpets using the proper methods.
Mix two parts, 3 per cent hydrogen peroxide and one part of dish soap. Wet a microfiber cloth and blot the stain. You can also mix cold water and vinegar to remove the blood stain. Let it soak for 10 minutes until blot it again with a dry cloth.
7. Oily or Greasy Stains
You can sprinkle a generous amount of baking soda and cornstarch over the greasy or oily area. Leave it for half an hour to activate and absorb all the oil. After that, vacuum-clean your carpet and see shiny results.
8. Paint stains
Fresh paint stains can be removed if you blot the area using a cloth dampened in a vinegar solution. For dried stains, blot the surface with paint thinner or prepare dish soap and warm water solvent. Apply it over the stain and leave it for a few minutes.
9. Use Vinegar to Kill Mould
White or cleaning vinegar is a non-toxic cleaning product that can easily kill around 80 per cent of mould species. So, it is good to inspect the back of your carpet as well and spray vinegar and warm water solution over the mouldy areas.
Leave it for a few minutes. You can also add tea tree essential oil to the solution because it has antibacterial properties. It can prevent the re-growth of mould and mildew. This can also help you beat lethal germs from the entire property.
10. Disinfect and Deodorise Your Carpet
Baking soda is one of the most versatile products that can help you kill germs and bacteria and banish bad smells without causing dullness or discolouration. Sprinkle a generous amount of baking soda and salt.
Leave it for at least an hour or until you vacuum-clean it. This will freshen up your floor coverings.
When to hire professional carpet cleaners?
It is good to hire professionals if the carpet needs an extensive or deep cleaning. Hire a company that specialises in carpet steam cleaning in Darwin. They use the steam cleaning method to remove stains, grime, grease and bad odours without causing any damage.
You can add carpet cleaning service when booking professionals for a thorough bond cleaning Darwin and easily get your carpets cleaned. This can help you avoid rental tenancy disputes and you can claim your bond back.
Follow these simple tricks or tips to remove stains, accumulated dust, grime, mould and back odours from your carpet before the end of lease inspection. A shiny and beautifully-maintained carpet will help you impress a fussy landlord or property manager.